Vw Models 80s Hello all I have a weird problem with my RCD the clock at the RCD is at 00 00 while the instrument cluster is set to the actual time Also I noticed that sometimes it appears 6 28 I tried to disconnect all the cables and reconnect and also I tried factory reset with no success Thanks in advance
Made this thread to reduce the threads and questions that are where is this or that Just look here and you will know 1 Mass Airflow sensor 2 EVAP canister 3 Fuel pressure regulator 4 Positive crankcase ventilation valve PCV valve 5 Intake air temperature sensor 6 Throttle position So here is a cooling system and engine temperature issue thread Read this before posting on your over heating car and such I will also outline the commonly failing thermostat So here s the issues Overheating Check that your fans are cycling If not check your fuse in position 19 for your
Vw Models 80s
Vw Models 80s
[img-1]
[img_title-2]
[img-2]
[img_title-3]
[img-3]
Very long story short we have a Tiguan we ve had in the dealer numerous times The low oil light comes on every time before the car makes it to 10k mile oil changes Roughly around 6k 7k The dealer has done a consumption test Checked for leaks Etc Just picked it back up today and they topped So I go to use my a c today and it never turned on I push the button it lights up but no cold air Blower is blowing good Thing is I never heard the compressor kick on Usually it makes my car idle high and vibrate like a sob What should I be looking for Not sure what fuses to
This discussion area is for any general discussions related specifically to Volkswagen I had recently replaced my MAP sensor on my Jetta S MK6 2 0L 4L and found oil on it and I think it it s because my Pcv valve and I know it s connected to the hose but is there a way to clean it Can I remove those 2 hoses connecting to the intake hose I can t find anything on this a video would
More picture related to Vw Models 80s
[img_title-4]
[img-4]
[img_title-5]
[img-5]
[img_title-6]
[img-6]
The VW EA888 3 engine family is the third generation of Volkswagen s EA888 inline 4 turbocharged engines The EA888 Gen 3 engine was introduced in 2011 and started appearing in VW Group vehicles from 2012 onward It replaced the EA888 Gen 2 bringing improvements in efficiency performance and I recently picked up a very clean stock 72 Beetle from a family member original owner The car sat for about six months before I brought it home so the first thing I did was change the oil I noticed there was a strong fuel smell in
[desc-10] [desc-11]
[img_title-7]
[img-7]
[img_title-8]
[img-8]
https://www.vwforum.com › threads
Hello all I have a weird problem with my RCD the clock at the RCD is at 00 00 while the instrument cluster is set to the actual time Also I noticed that sometimes it appears 6 28 I tried to disconnect all the cables and reconnect and also I tried factory reset with no success Thanks in advance
https://www.vwforum.com › threads
Made this thread to reduce the threads and questions that are where is this or that Just look here and you will know 1 Mass Airflow sensor 2 EVAP canister 3 Fuel pressure regulator 4 Positive crankcase ventilation valve PCV valve 5 Intake air temperature sensor 6 Throttle position
[img_title-9]
[img_title-7]
[img_title-10]
[img_title-11]
[img_title-12]
[img_title-13]
[img_title-13]
[img_title-14]
[img_title-15]
[img_title-16]
Vw Models 80s - So I go to use my a c today and it never turned on I push the button it lights up but no cold air Blower is blowing good Thing is I never heard the compressor kick on Usually it makes my car idle high and vibrate like a sob What should I be looking for Not sure what fuses to
